Find Aluminum High Speed Doors, Spiral High Speed Door, Metal High Speed Doors on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
Model No.: RRD-Alu
Aluminum spiral high speed rolling doors, is the most high end model of all rapid roller doors. It is made from strong and thermal insulated aluminum sandwich panel, and with same high running speed as regular pvc high speed doors. The door rail is specially made in spiral shape, for the panels moving smoothly in it up and down. Such spiral rapid door have full advantages including fast running speed, thermal insulation, excellent wind resistance, and burglarproof strength. It is the best choice for high standard factory, warehouse, garages and commercial buildings. It can be installed both exterior or interior locations.
High speed door is a type of automatic roll up door that is designed to open and close very quickly, widely used in modern factories and warehouses. It can run in high speed and frequency, very fit for areas with heavy traffic. It improves efficiency of material handling. On the other hand, air flow and heat conduction through the door is reduced obviously, to keep clean, hygiene and temperature inside room. Automatic running is realized with programmed control system and sensors.
High speed running
The opening speed can reaches up to 2.0m/s. And the closing speed can reaches up to 1.0m/s. This means that the door can finish a cycle of opening and closing within in
several seconds. It bring several major benefits:
Improve work efficiency:
Workers or forklifts will no need wait in front of the door and can directly go across it. The material handling speed is higher by at least 5 times than tradional roll up doors;
Keep clean and hygiene:
The fast running reduces the open time to only seconds in a cycle of passing the door. Thus much less outside air and dust will enter the room;
Heat loss is reduced by large by reducing open time.
High frequency working
The motor is frequency motor, and control panel is frequency inverter system. It can change work power output gently. So the door can start and stop in a soft process. Its running speed will accelerate or decelerate gradually. This can avoid overriding and over-heating caused by constant up and down. So the door can keep running and no need worry its motor burnt or structure damaged.
Our door can run up to 2000 times per day. This is why it is a best choice for busy area with heavy traffic like forklifts or passing workers. Our door can run up to 2000 times per day. This is why it is a best choice for busy area with heavy traffic like forklifts or passing workers.
Thermal insulated and high strength
The door slat is made from double skin aluminum sheet filled with high density PU foam. Total thickness reaches 43mm.
Good thermal insulation:
Special cold-bridge design, cutting off the heat transmission route. It can help keep temperature inside the room;
benefiting from its aluminum material and reinforcing curving design, the door can windstand wind up to 120km/h;
it can prevent outside people and protect the warehouse from theft and robbery.
Our guide rail is a Archimedes spiral. It is the line of points corresponding to the locations over time of a point moving away from a fixed point with a constant speed along a line that rotates with constant angular velocity.
With such a spiral guide rail, our doors can move very smooth in a constant speed. This reduces the friction and obstruction during coiling and improves the work life.
Longer work life with lower maintenance
Advanced Italy servo technology drive motor and control system. Compared with traditional door system in the market, it has several advantages:
They calibrate with each other, to make running limit more accurate than tradtional limit sensors. This completely avoid running limits error and reduce maintenance. And even if one encoder is damaged, you can switch to another encoder and the door will continue to work well, no need repair;
outside encoder is advanced absolute encoder. It will always keep the set limits even during power failure. So you no need bother to do the frequent job of re-seting the limits;
Flexile Torque Control System:
The output torque of motor keeps changing according to running speed and load automaticlaly. This avoid over-heating and over-load after long time use, and make sure the door
work longer life.
User freindly Human-machine interface system
There is a LED display on the controller, showing all parameters and setting steps in English language. You can set or change any parameters like using a mobile phone. So you will feel very easy and comfortable to use the doors even you do not have any experience.
And it is inbuilt with Fault-shooting program. The display will show the error information when there is some problem.
There are addtional input and output signals in the controller. You can activate it by the screeen and the door will work together with your production line, robots, conveyor, or other machines.
We supply six different colors for your choice. You can make a free selection among them. Our doors can integrate into your whole building design and make the building harmony and beautiful.
①Grey, ② Red, ③ Orange, ④ Champagne,
⑤ Yellow, ⑥ White, ⑦ Blue, ⑧ Silver, ⑨ Coffee
Transparent windows can be made at human eye height. Its material is polycarbonate window with ultroviolet sunlight-resist. This makes it easy to see what is happening at
another side of the door. It will be more safe for a busy area with moving workers and forklifts or other vehicles.
Multiple safety protection
Considering the high speed running of the door, safety protection become very important to avoid possible accidents. This can not be neglected when using such high performance doors. There are three safety protection devices:
Safety photo sensor:
The sensor can send a infrared light beam from one side to another. When it is blocked by passing human or vehicles, the door will immediately stop or get up. Thus it aims to avoid accident;
Safety airbag sensor:
It is a soft rubber airbag at the bottom. If something touches the bottom, the door will stop or get up. So it aims to stop accident once it happens;
It gives out light flash signal or sound signal when the door running. Passing workers or vehicles can easily get aware that the door is working and take special care to avoid accidents.
Various shape to fit your project site
In some cases, you may find it difficult to install a standard spiral door in your area. The ceiling is not high enough, or there are some objects like water pipe or cable tubes passing by. There is not enough head rom to place the top body. To solve this problem, we expand the design of guide rails, and offer three options.
Archimedes spiral, first choice, for enough top space;
for limited space but above 500mm space
for very limited top space less than 500mm;
Manual opening device for emergency use
Each door will have a manual opening device fixed on its side frame. If there is power failure, pull up the manual device, and the door will open itself for some height, for emergency opening.
Various Operation Methods
Wall mounted control buttons (standard)
Remote control Radar sensor Vechicle loop detector Pull-cord switch:
|Applicable location:||both interior and exterior|
|Max dimension:||8000mm wide*7000mm high|
|Max opening Speed:||2.0m/s|
|Max closing speed:||1.0m/s|
|Wind resistance:||Beaufort scale 10 (25m/s)|
|Power supply:||1-phase 220±10%V,50/60HZ, or 1-phase 380±10%V,50/60HZ|
|Protection level of electric:||IP55|
|Available colors of fabric:||Silver, Yellow, Blue, Red, Grey, White, Clear|
|Door panel:||43mm thick sandwich panel filled with polyurethane of density 48kg/m³|
|Frame material:||Powder coated galvanized steel, optional for 304 stainless steel|
|Lifting way:||Standard spiral (950mm+ space); Oval spiral (650mm+ space) ; Oval|